China OEM Factory Directly Provide O Ring Chain Motorcycle Drive Chain for Dirt Bike

Product Description

Factory Directly Provide O ring chain motorcycle drive chain for dirt bike

We also supply motorcycle chain 25, 25H, 06B, 415, 415H, 420, 420H, 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, O ring and X ring chain and so on, our chains are both excellent in quality and reasonable in price

1.Good quality and reasonable price

2.Has taken measure to better antirust

3.Long-life duration and high strength

4.Pre-stretching and running for each motor chain before delivery

5.Riveting: Two sides riveting or 4 sides riveting

6.All parts are heat treatment (quenching and tempering) and controlled in a reasonable tolerance range

7.We can also produce as your sample or drawing

8.Packing: According to your demand to design

 

 Specifications are as follows:

Chain No.

Pitch

Roller diameter

Width between inner plates

Pin diameter

Pin length

Inner plate depth

Plate thickness

Ultimate tensile strength

Average tensile strength

Fatigue

p

d1 max

b1 min

Ld2 max

max

Lc max

h2 max

T1

Q min

Q0

amx

mm

mm

mm

mm

mm

mm

mm

mm

kn

kn

kgf

06B

9.525

6.35

5.72

3.28

13.2

14.2

8.2

1.3

9

10

 

415

12.7

7.75

4.88

3.96

12.5

13.9

10.4

1.3

11.6

12.5

380

415H

12.7

7.75

4.88

3.96

13.1

14.5

11.5

1.5

15.6

16.1

380

420

12.7

7.77

6.35

3.96

14.5

16.1

12

1.5

16

16.5

380

420H

12.7

7.77

6.35

3.96

15.7

17.4

12

1.8

17

17.5

380

428

12.7

8.51

7.75

4.45

16.5

18.05

12

1.6

17.8

18.5

380

428H

12.7

8.51

7.75

4.45

18.3

19.08

12

2.03

20.6

21.1

450

428HG

12.7

8.51

7.75

4.51

18.9

20.1

12.3

2

20.6

21.5

450

520

15.875

10.16

6.35

5.08

17.7

19

15

2

26.5

29.5

650

520H

15.875

10.16

6.35

5.24

18.9

20.5

15

2.42

30

31

700

525

15.875

10.16

7.94

5.08

18.8

20.5

15

2.03

26.6

29

650

525H

15.875

10.16

7.74

5.24

20.4

22.2

15

2.42

30

31

700

530

15.875

10.16

9.4

5.08

20.9

22.2

15

2

26.5

29.7

650

530H

15.875

10.16

9.4

5.08

21.9

24.2

15

2.42

30

31.5

700

630

19.05

11.91

9.4

5.94

22.2

24

18

2.4

35

37

800

HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

 Due to our CZPT in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

 With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

 

Surface: Golden, Black, Blue, Grey
Surface Treatment: Zinc Plated, Sand Blasting, Dull Polish
Process: Assemble
Structure (for Chain): Motorcycle Chain
Certification: ISO9001:2001
Number of Row: Single Row
Customization:
Available

|

Customized Request

drive chain

What are the advantages of using a lightweight drive chain?

Using a lightweight drive chain offers several advantages in certain applications where weight reduction is a critical factor. Here is a detailed explanation:

Lightweight drive chains are specifically designed to provide reliable power transmission while minimizing the overall weight of the system. The advantages of using such chains include:

  • Improved Energy Efficiency: Lightweight drive chains reduce the overall mass and inertia of the power transmission system. This results in improved energy efficiency, as less power is required to accelerate and decelerate the lighter components. Reduced energy consumption contributes to cost savings and promotes sustainability.
  • Enhanced System Performance: By reducing the weight of the drive chain, the overall system performance can be improved. The reduced mass allows for quicker response times, faster acceleration, and improved dynamic performance of the machinery or equipment. This can be particularly beneficial in applications that require rapid changes in speed or direction.
  • Increased Speed Capability: Lightweight drive chains enable higher speeds due to reduced inertia and decreased centrifugal forces. This allows for faster operation, quicker cycle times, and improved productivity in applications that demand high-speed power transmission.
  • Reduced Wear and Friction: The lighter weight of the drive chain can contribute to reduced wear and friction between the chain and the sprockets. With less weight bearing on the chain and sprocket teeth, there is reduced contact stress and improved lubrication distribution. This leads to lower frictional losses, decreased wear, and extended chain life.
  • Easier Installation and Maintenance: Lightweight drive chains are easier to handle and install compared to heavier chains, reducing the physical strain on operators during installation or maintenance tasks. The reduced weight simplifies handling and improves overall ergonomics, making it more convenient for operators to work with the chain.
  • Application Versatility: Lightweight drive chains can be used in a wide range of industries and applications where weight reduction is advantageous. They are commonly employed in sectors such as automotive, robotics, aerospace, and portable equipment, where lightweight components contribute to improved performance and fuel efficiency.

It is important to consider the specific requirements and constraints of the application when selecting a lightweight drive chain. Factors such as load capacity, speed capabilities, environmental conditions, and material selection should be taken into account.

While lightweight drive chains offer numerous benefits, it is crucial to ensure that their reduced weight does not compromise their load-carrying capacity or durability. Regular maintenance, including proper tensioning, lubrication, and periodic inspection, is essential to maintain the optimal performance and reliability of lightweight drive chains.

By utilizing lightweight drive chains in appropriate applications, operators can benefit from improved energy efficiency, enhanced system performance, increased speed capabilities, reduced wear and friction, easier installation and maintenance, and overall weight reduction, contributing to improved efficiency and performance of the power transmission system.

drive chain

Can a drive chain be used in a robotics or automation application?

Yes, drive chains can be used in robotics or automation applications as a reliable and efficient method of power transmission. Here is a detailed explanation:

In robotics and automation, where precise and controlled movement is essential, drive chains offer several advantages:

  • Precision and Accuracy: Drive chains can provide accurate and repeatable positioning, making them suitable for applications that require precise movement and control.
  • High Torque Transfer: Drive chains are capable of handling high torque loads, allowing them to transmit power effectively in robotic and automation systems.
  • Efficient Power Transmission: Drive chains offer high efficiency in power transmission, minimizing energy loss during transfer and ensuring that the maximum amount of power is delivered to the intended components.
  • Flexibility and Customization: Drive chains provide flexibility in terms of design and customization. They can be adapted to various robotic and automation applications, accommodating different load requirements, configurations, and space constraints.
  • Compact Design: Drive chains have a compact design, which is beneficial in applications where space is limited. They can transmit power in tight or confined areas without compromising performance.
  • Reliability and Durability: Drive chains are known for their durability and ability to withstand demanding operating conditions. They are designed to endure continuous operation, shock loads, and varying environmental factors.

It’s important to select the appropriate drive chain type, size, and material for the specific robotics or automation application. Additionally, regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and longevity of the drive chain in these applications.

drive chain

Can a drive chain be used in high-speed applications?

Yes, a drive chain can be used in high-speed applications, but there are certain considerations to keep in mind. Here’s an explanation:

A drive chain’s suitability for high-speed applications depends on several factors:

  • 1. Type of Drive Chain: Not all types of drive chains are suitable for high-speed applications. Roller chains, especially those designed for high-speed use, are more commonly used in such scenarios. These chains are designed with precision manufacturing techniques, tighter tolerances, and specialized lubrication requirements to handle the demands of high-speed operation.
  • 2. Quality and Design: The quality and design of the drive chain play a crucial role in its ability to handle high speeds. High-quality drive chains manufactured by reputable companies are engineered to minimize vibration, noise, and wear, enabling them to operate at higher speeds with greater efficiency and reliability.
  • 3. Lubrication and Maintenance: Proper lubrication is critical for high-speed drive chains to minimize friction and reduce wear. Specialized lubricants designed for high-speed applications may be recommended. Regular maintenance, including lubrication and tension adjustment, is necessary to ensure optimal performance and longevity.
  • 4. Alignment and Tension: Accurate alignment and appropriate tension are crucial for high-speed drive chains. Misalignment or improper tension can lead to increased wear, vibration, noise, and reduced performance. Regular inspection and adjustment are necessary to maintain proper alignment and tension.
  • 5. Operating Conditions: The operating conditions, such as temperature, load, and environmental factors, should be taken into account. High-speed applications may generate additional heat and place higher demands on the chain. Ensuring suitable operating conditions and proper chain selection is important to prevent overheating, premature wear, and potential failure.

Ultimately, when considering a drive chain for high-speed applications, it is essential to consult the manufacturer’s guidelines and select a chain specifically designed and rated for the desired speed range. Adhering to recommended maintenance practices and ensuring suitable operating conditions will help ensure safe and reliable performance of the drive chain in high-speed applications.

China OEM Factory Directly Provide O Ring Chain Motorcycle Drive Chain for Dirt Bike  China OEM Factory Directly Provide O Ring Chain Motorcycle Drive Chain for Dirt Bike
editor by CX 2023-09-05